June 17, 2014

Tutorial Tuesday

Happy Tuesday, everyone!

Today's tutorial comes to you out of somewhat of a necessity in my world. I sew and stitch quite a bit and realized that I needed a thread catcher for the floss tails, threads, and fabric pieces that I snip off of my projects as I am working on them. I know I am not the only one who needs a quick place to toss the excess threads and floss while I am sewing and stitching. I am hoping you can make use of this project in your workspace as you stitch up your WIP, as well!



To make this thread catcher basket out of fabric, you'll need:
- Fabric for exterior (11 inches tall by 14.5 inches wide)
- Fabric for lining (11 inches tall by 14.5 inches wide)
- medium weight interfacing (11 inches tall by 14.5 inches wide)
- sewing machine and supplies
- scissors
- embroidery hoop, floss, and needles

I used the spool image from the Sewing Collage pattern available at Urban Threads.


Step One: Transfer the embroidery pattern to one of the front exterior panels of fabric, keeping it 2-inches from the top edge. Stitch. I used a 3-ply backstitch for this spool pattern.


Step Two: Place the exterior fabrics right sides together, with a piece of interfacing on the wrong side of each exterior piece. You should have a fabric sandwich with interfacing, exterior piece right side up, exterior piece right side down, then a piece of interfacing on top of that. 


Step Three: Sew around the three sides of the exterior and interfacing using a 1/2-inch seam allowance, leaving the top open. 


Step Four: To create a flat bottom for our fabric basket, take one bottom corner and fold it so the seams are laying flat against each other. 


Mark 2.5-inches from the center of the seam, where there is a V. Stitch straight across using the 2.5-inch mark as a guide. 


Clip the excess fabric away. Repeat for other side.


Step Five: Take the interior or lining pieces of fabric and place them right sides together. Stitch along the three edges with a 1/2-inch seam allowance, leaving a 2-inch space open along the center of the bottom edge. 


Step Six: Square off the bottom of the lining as we did for the exterior in Step Four. Mark 2.5-inches from the center of the seam, where there is a V. Stitch straight across using the 2.5-inch mark as a guide. Clip the excess fabric away. Repeat for other side 


Step Seven: Turn the exterior ride sides out. Place this inside of the lining, right sides together. Stitch along the top edge with a 1/2-inch seam allowance. 



Step Eight: Flip the fabric basket right side out, by pulling through the opening in the bottom seam of the lining. 


Step Nine: It is optional for you to press this top edge. Top stitch along the top at the 1/4 inch and 1/2 inch marks. 



Step Ten: Stitch the space used to flip the fabric basket shut. 


Step Eleven: Place close to your sewing machine or work area and toss your clipped threads, floss pieces, and fabric scraps into the basket. 


I hope you enjoy this thread catcher fabric basket and take the time to make one for yourself. It really does help around the work room. 

Hope you have a great Tuesday!

Hi, I'm Kristen! I am a lover of all things stitchy and crafty. I have been sewing for as long as I can remember. My grandmother taught me how to sew Barbie clothes when I was young and I have been sewing ever since.

You can find me at Bobbypin Bandit, on Instagram, and my Etsy shop.

6 comments:

  1. Great tutorial! I already have a thread/scrap catcher on my sewing table, since I tend to make a mess when I sew (or do anything, really) - but this is much cuter than mine, so I may have to make one!

    ReplyDelete
  2. The stitched spool with thread and the super cute lining fabric just made the whole project shine!!!!!! Beautiful!!!!!

    ReplyDelete
  3. What a terrific idea! Your tutorial is very well done!

    ReplyDelete
  4. so cute! Thanks! I am just learning to embroider and have a question, hope someone has an answer. The pattern I just got has dotted lines running through some parts of each picture (It's an alphabet sampler-no instructions with it) Is it a code for working a certain kind of stitch? I can send a picture if this makes no sense. Is there another place you've found to ask these kinds of questions?
    Marsha

    ReplyDelete
  5. This is so cute! Love the embroidery design and the bees on the lining :)

    ReplyDelete
  6. Me encanta su idea muy Original

    ReplyDelete

SITE DESIGN BY RYLEE BLAKE DESIGNS